106
107
Appendix 2 -
Equation Creation Using Math Editor
microvolt():
Microvolts (Slotno, ChannelNo) is used with parameters. Parameters of
the analog input channels of the slot referred to as raw data the value of reading
microvolts. Slot and Channel Number should be a zero index (microvolts (0.0): 1.Slot 's
channel 1' s value in microvolts is reading.).
Figure 9.4 Script selection button
Appendix 2 -
Equation Creation Using Math Editor
Equation for Math Analog and Math Digital can be easily created using Math
Editor. User can apply arithmetic operators (+,-,*,/), comparison operators
(>,<,>=,<=,==), constants, channel process values and miscellaneous functions into
equations. Parenthesis can be added to equations for grouping the operations,
if necessary. The most left operator in the same parenthesis has the highest precedence.
Operator precedence can be changed using parenthesis. Home key sets the cursor to
the left most position, End key sets the cursor to the right most position,
key shifts
the cursor one character left and
key shifts the cursor one character right. Delete
and Back pace keys delete one character towards to the left or right respectively.
Clear key clears the existing equation. Channel process values can be included in to
the equations by pressing SOURCE key. RUN key runs the equation for testing.
Pressing OK key saves the equation, CANCEL key cancels all operations.
s
is defined in the key device used for the incorporation of equality of a team ready
to function. When pressed
out the following options.
Count of seconds indicates that the system time.
The system indicates that the clock match minute.
It displays the system time.
Which it indicates that year on the system.
Indicates that the system on which month.
Indicates that the day on which the System.
The device shows the core temperature of the processor.
The device displays the temperature of the processor module.
CJ (SlotNo, ChannelNo) is used with parameters. The channel parameters gives
the cold spot temperature of the specified slot. Slot and Channel Number should be a
zero index (cj (0,0): 1.Slot channel 1 's cold spot temperature data.).
<---
--->
Script
Script
$(second):
$(minute):
$(hour):
$(year):
$(month):
$(day):
$(coretemp):
$(moduletemp):
cj():
