Eliet Prof 6 страница 79 Скачать руководство пользователя | Manualshive

Страница: 79 / 92

background image

79

English

• Risk of injury, puncturing the skin or blindness due to contact with a stream of highly-pressuri-

sed oil in the event of a leak in the hydraulic circuit.

• Risk of poisoning from exhaust fumes while the motor is running in an enclosed space.
• Risk of respiratory system irritation or pulmonary problems due to inhaling dust produced by

the machine.

• Impairment of hearing due to insufficient ear protection while working.
• Nervous or rheumatic problems after long periods of shredding without resting.
• Risk of joint pain due to the vibrations caused by continually feeding thick branches into the

machine.

• Risk of electrocution when touching the high-tension engine ignition line.
• Risk of overloading the spinal cord or back muscles if the machine is not placed at an ergono-

mic level for working.

• Risk of crushing or bruising the lower parts of the body while moving the machine.
• Risk of crushing your feet between the tracks and driving elements.
• Risk of strangulation or becoming stuck if loose-fitting clothing is pulled into the driving mecha-

nisms or the tracks.

• Risk of becoming crushed between the machine and an obstacle while moving it in reverse.
• Risk of becoming stuck beneath the machine if it falls over during loading or unloading.
• Risk of the machine falling if it is not hoisted or coupled correctly.
• Risk of becoming stuck between the driving handle and an obstacle while moving the machine

through narrow passageways or operating it.

• Injury due to a fall when driving on a surface that cannot bear the weight of the operator and

the machine.

This list is incomplete and is provided for informational purposes only in regards to the safety of
the operator.

«
...
77
78
79
80
81
...
»

Содержание Prof 6





























































































Отзывы:

Нет отзывов

Похожие инструкции для Prof 6

Бренд: Gardol Страницы: 240

Бренд: Echo Страницы: 1

Бренд: budget Страницы: 52

Powershred FS 3

Бренд: Fellowes Страницы: 4

Powershred C-420

Бренд: Fellowes Страницы: 2

Powershred C-325Ci

Бренд: Fellowes Страницы: 4

Powershred C-420C

Бренд: Fellowes Страницы: 5

Бренд: Fellowes Страницы: 2

Бренд: Martin Yale Страницы: 56

Бренд: HSM Страницы: 20

Бренд: HSM Страницы: 68

Бренд: Hama Страницы: 114

Бренд: Garland Страницы: 36

Бренд: Olympia Страницы: 56

Бренд: IDEAL Страницы: 32

Бренд: Fellowes Страницы: 4

ScriptStroyer UC5500

Бренд: Martin Yale Industries Страницы: 2

Бренд: ThunderDog Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды