manualshive.com logo in svg

Eliet Prof 6, Руководство пользователя, Страница: 23 / 92

Поделиться
Скачать
Eliet Prof 6 Скачать руководство пользователя страница 23

23

English

7.3.5.  Danger zone 

• While the machine is operating, make sure that nobody comes within 10 m - 30 ft of it. Do not 

take any risks: Turn off the engine immediately as soon as anyone enters the danger zone.

• When you walk away from the machine, the engine must be switched off. Always wait until the 

blades have come to a complete stop before carrying out any operations on the machine. Once 
the engine is running, focus all of your attention on operating the machine.

7.3.6.  Regular maintenance

For your information

: Regular maintenance is vital to ensuring your own secu-

rity and a long service live from your machine.

• Periodic maintenance is essential. For this reason, strictly follow the maintenance schedule 

included in this instruction manual.(see Section 11.2, page 48) 

• When certain parts must be replaced due to wear or damage, always consult your ELIET dealer 

and ask them for original ELIET replacement parts. This is important for your own safety (you 
will find an authorised ELIET dealer near you at 

www.eliet.eu

).

• Always make sure the engine is switched off and the battery cables disconnected before perfor-

ming repairs or maintenance.

Projection zone (280°)

Operator 
zone
while 

working

Operator 

zone
while 
working

Содержание Prof 6





























































































Отзывы:

Нет отзывов