Eliet Prof 6, Руководство пользователя, Страница: 31 / 92

31
English
Once the engine has been running for a few seconds (+/- 5 seconds maximum), set the choke di-
rectly to the "open" position. This is an important step, since it will avoid overflooding the engine
with petrol (UK)/ gas (USA). Otherwise, the engine will slow down, start emitting thick smoke and
finally cut out. If this should happen, restart the engine without using the starter.
If you are no longer able to start the engine, this is likely due to a dirty spark plug. In that case,
you will either need to clean it or replace it.
Procedure for shutting off the engine:
Caution: Only shut off the engine once the shredder, the shredding chamber
and the turbine are empty. You will know when this is when no more wood chips
are being ejected from the blow chute. The blade shaft will continue to turn
due to inertia after the engine has been shut off. Wait a few seconds to ensure
that it has come to a complete stop before conducting any interventions on the
machine.
• Wait for the feeding hopper to be completely empty, and ensure that no more wood chips are
being ejected from the blow chute.
• Turn off the feeding roller to avoid any further material from being fed into the machine.
• Wait a few moments to ensure that all waste has been shredded.
• Slowly reduce the engine speed, and pull the throttle lever back to the image of the turtle.
• Afterwards, for the:
• Subaru engine: Turn the ignition key to the "O" position.
• Vanguard engine: Set the throttle to the lowest position (O).
9.5. Moving the machine
Backwards Forwards