Eliet E 501, Руководство по эксплуатации

Страница: 33 / 64

33
English
9.7. Stopping the engine
• To stop the engine, switch the throttle or turn the knob into the “OFF” position.
• If the machine is equipped with a fuel valve, close it.
9.8. After finishing the work
9.8.1. Cleaning the machine
Please note: machine maintenance such as cleaning should only be carried out
when the engine is turned off.
ELIET recommends cleaning the machine after each use. We recommend performing an inspection
each time you clean the machine to check component and machine integrity. This allows timely inter-
vention and prevention of any defects. This will ensure a longer service life for your machine.
Failure to clean the machine can cause:
• Increased wear of the bearings.
• Increased wear and tear of seals.
• Reduced engine cooling.
• Increased risk of fire.
• Inability to notice cracks or tears.
• Damage to the paint.
• Illegibility of safety stickers.
Remark: Failure to perform the daily cleaning will result in loss of warranty.
Caution: Wear suitable clothing when cleaning. Utility gloves are necessary.
The following points require special attention:
• The engine must be free of dust and dirt. The cooling fins in particular as well as the area
around the exhaust must be clean. The area around the fuel cap must be kept clean to avoid
dirt entering the fuel tank.
• The bushings must be cleaned of sand and dirt that has become stuck in the lubricating grease.
Reapply lubrication after wiping. (read § 11.3; page 41)
• Remove dirt from the chassis and more specifically from the stickers with safety instructions.
• Use a dry cloth or soft brush for any cleaning. Use penetrating oil with MoS2 to remove grease
and lubricants. The spray is a lubricant and rust solvent at the same time.
• Clean the air filter after each use . (read § 11.4.3; page 43)
• Power washing the machine is not recommended by the manufacturer. The high-pressure water
jet reaches places where water should be avoided. Water is the number one cause of rust and
this must be avoided at all times.