Preface
Thank you for purchasing our ESL-7800 slit lamp. The slit lamp will have
another capability of photography, if you purchase the appliance with the
photography accessories. At the same time, in order to meet the needs of the customs,
we provide sorts of accessories, which can be used widely. Please read this manual
carefully for the sake of your best use.
General Requirements for Safety
Please read carefully about following precautions to avoid unexpected personal
injury as well as the product being damaged and other possible dangers.
Precautions
1.
Do not use this instrument in the environment prone to fire and blast or
where there is much dust and with high temperature. Use it in the room and
simultaneously be careful to keep it clean and dry.
2.
Check that all the wires are correctly and firmly connected before using.
Ensure that the instrument is well grounded.
3.
Please pay attention to all the ratings of the electrical connecting terminal.
4.
Only use fuse according to the specifications and rated values stipulated by
our product.
5.
Use the power cable supplied with this instrument.
6.
Don’t touch the surface of the lens and prism with hand or hard objects.
7.
Turn off the main power first before replacing the main bulb, flash lamp and
fuse.
8.
To prevent the instrument from falling down to floor, it should be placed on
the floor where the inclination angle is less than 10
°
.
9.
Turn off the power and cover the instrument with dust-prove hood when it is
not in use.
10.
In case there is any trouble, please first refer to the trouble-shooting guide. If
it still can’t work, please contact with the authorized distributor or our
Repair Department.
THE SAFETY MARKS USED IN THIS INSTRUMENT
TYPE B
ATTENTION PLEASE
TERMINAL OF
REFER TO THIS MANUAL THE PROTECTIVE GROUNDING
