- 27 -
Installation and First Start-Up
The normally closed contact of the presence detector has to be integrated into the safety circuit at a non over-
bridgeable place before the main contactors. It is mechanically mounted with the fixture that is contained in the
mounting kit S-RMS-WH (
8.5
Mounting of the Sensor
The sensor is mounted on the cabin or the cabin frame. The mounting position is generally predetermined by the
situation on site
The integrated mounting grooves on the housing of the measuring system enable a very easy and self-
explanatory mounting on three sides. Any M6 hexagon screws (according to DIN933) or M6 square nuts (ac-
cording to DIN562) can be inserted in order to attach the system at the desired position.
Fig. 9: Mounting grooves on the sensor in the unguided variant (left) and the semi-guided variant (right)
ELGO offers the LIMAX44 RED mounting angle (
11.3) for the mounting of the sensor on the cabin roof.
NOTE!
When mounting the sensor or inserting the magnetic tape into the guid-
ing rail, the arrows on the tape and the sensor need to be observed.
A wrong orientation does not provide the correct position!
The arrows on the magnetic tape and the sensor point towards the
positive counting direction and must point in the direction of the shaft
head!
