ELGO Electronic Z58-600 Series, Руководство по эксплуатации

Страница: 11 / 28

Technical Data
- 11 -
6.4 Technical Data Z58-600
Z58-600 (standard version)
Mechanical Data
Housing panel housing (standard) or built-on housing (option A)
Housing material aluminium, black
Housing dimensions (W x H) panel housing (standard): W x H x D = 96 x 72 x 70 mm
built-on housing (option A): W x H x D = 71.3 x 102.6 x 95 mm
Panel cut out (W x H) W x H = 93 x 67 mm
Keyboard foil with short stroke keys
Installation depth 78 mm (including screw terminals)
115 mm (including D-SUB connector)
Electrical Data
Display 6-digits LED (red, digit height: 14 mm)
Accuracy ± 1 Digit
Power supply voltage Standard: 24 VDC ± 20 %
Version Z58-654-115-X-A: 115 VAC
Version Z58-654-230-X-A: 230 VAC
Current consumption 70 mA (without measuring system)
Signal inputs HTL / TTL / RS422 (depends on order)
Input channels (incremental) A, B resp. A, A', B, B', Z, Z'
Channels for absolute encoders RX, RX‘, TX, TX‘
Input frequency max. 100 KHz (optionally 500 KHz)
External inputs 3 digital inputs (set functions)
characteristics: PNP, active high
switching voltage: +24 VDC
input current: max. 10 mA
Relay outputs 2 potential-free shutters (24 VDC / max. 1 A)
Analog outputs (option)
12 Bit, 0... 10 VDC (max.= 5mA) or 0 (4)... 20mA (R
max
= 200 Ω )
Interfaces RS232 (transmission of actual value)
Connections pluggable screw terminals and 9 pin (female) D-SUB connectors
Data memory
EEPROM
Optional accessories
external power pack NG24.0 for 115/230 VAC supply
Environmental conditions
Operating temperature 0 … +50 °C
Storage temperature -20 … +80 °C
Humidity max. 80 %, non-condensing
Protection class (front)
IP43 (installed state)
Protection class (rear)
IP40