Elgin Pelican P, Руководство оператора, Страница: 62 / 112

4. When the hopper reaches the limit of its
motion, carefully lower the hopper completely
to the ground or pavement.
5. Lower the main broom, conveyor and side
broom(s) to sweeping positions. Start rotation
of the main broom and conveyor.
6. Fill the water tank to overflowing, allowing the
water to flush the conveyor belt for one to two
minutes. Reverse the conveyor several times
during this flushing.
7. With the conveyor still running forward, use
high pressure water to flush the conveyor and
belt backing plate.
8. Flush out the hopper, all undercarriage parts,
side broom(s), dirt deflectors and dirt shoes.
9. Reverse the conveyor for no more than 30 sec-
onds and use high pressure water to dislodge
material between roll and edge of scraper bar.
10. Washdown exterior of sweeper, including lights,
mirrors, and safety decals.
MAINTENANCE
M-8
Raise
Lower
Roll
out
Roll
back
Hopper Dump Control
Figure M-6