Elgin Pelican P, Руководство оператора, Страница: 102 / 112

take the following steps to minimize corrosion and
deterioration.
1. Change engine oil and replace the oil filter.
Used oil will not give adequate protection.
2. Drain and flush the cooling system only if the
engine will be stored for a year or more.
3. Loosen all belts to relieve tension. Remove the
belts, if desired.
4. Seal all openings on the engine with plastic
bags and tape.
SPRING STARTUP
Follow all directions of the engine manufacturer for
startup of equipment.
1. Remove all protective coverings, including
those on the engine and electrical systems.
CAUTION
Battery gas can explode. Keep sparks and
flames away from batteries. If the battery elec-
trolyte level must be checked, use an electric
light. Never check battery charge by placing a
metal object across the posts. Use a voltmeter
or hydrometer. Always remove the grounded
(—) battery cable first and connect it last.
2. Inspect the belts, and replace them, if they
show cracks, stretching or fraying. If the belts
were removed, install them. Adjust the belts to
their proper tension.
3. If necessary, fill the engine cooling system.
4. For the spray water system, take the following
steps.
a. Close the shutoff valve and install the fil-
ter.
b. Close the water tank drain.
!
SER
VICE
PROCEDURES
SP-36