Elettrotest TPS/M/D, Руководство пользователя

Страница: 32 / 42

32
USER MANUAL TPS/M/D 62000447 REV 00_ – 31/08/2021
4.5.1.1.1. SENSE MODE
The output voltage’s stabilization behave in the same way in both the configurations on the TPS
output terminals (2 wire) and on a possible long distance outlet (4 wire), to eliminate the fall in
voltage due to cable connections. To operate the long distance stabilization first connect the
opposite terminals on the back of the machine following the indications at the voice
INSTALLATION.
The choice of the kind of long distance stabilization can
be operated by pushing the buttons SENSE, the 4WIRE and 2WIRE configuration is indicated with a
LED. Note that the TPS corrects voltage drop on wires up to 5% of set voltage to prevent any
overheating of the line, exceeded this limit, the TPS does not guarantee that the
value of output voltage is equal to the voltage setting and It displays an error signal (see VOLTAGE
ALARMS).
4.5.1.1.2. OUTPUT MODE
If the machine has this options you can select 1-phase or 3-phase. In 1-phase mode the machine
supply all the power in only one phase.
The output power is variable to type of the load, for resistive load the is nominal power, for
inductor load is greater of the nominal power, for capacitor load is less of the nominal power.
4.5.1.1.3. AC/DC
The TPS is able to supply AC and DC voltage with the limit you can find on the chart 1.6, each
phase are independent so it is possible to supply three different AC or DC voltage for each phase.
4.5.2. REMOTE SETTINGS
By clicking on the general REMOTE SETTING button , allows to access the
settings menu page, this page depends from the serial output (ETHERNET / RS232 / RS485), down
there is a table with the available protocol in the different interface
Port
RS232 RS485
Ethernet
Virtual Com
Ethernet
TCP Server
Pr
o
to
co
l
Elettrotest
✓
1200/9600/19200
✓
1200/9600/19200
✓
(Baud rate select by
Moxa driver interface)
✓
(protocol encapsulated on
TPC communication)
SCPI
✓
1200/9600/19200
✓
1200/9600/19200
✓
(Baud rate select by
Moxa driver interface)
✓
(protocol encapsulated on
TPC communication)
Modbus
RTU
✓
1200/9600/19200
✓
1200/9600/19200
✓
(Baud rate select by
Moxa driver interface)
✓
(protocol encapsulated on
TPC communication)
Modbus
TCP/IP
  
✓