Elettrotest RPS/M/10K, Руководство пользователя

Страница: 18 / 49

17
USER MANUAL RPS/M - 62000582 Rel.2.0 – 12/10/2018
All the signals in the analog interface (both analog and digital) are referred to GND (9th pin of the
connector).
Input circuit of “Ref analog” signal
Pin Nome Descrizione Livelli
1 +5V Power supply (Max 40mA) Respect to GND
2 Ref. analog Pwm or analog input 0-10V (respect to GND)
3 50/60 Hz Digital input 0V (50Hz) – 5V (60Hz)
4 Output relay Digital input 0V (Off) – 5V (On)
5 DC/AC Digital input 0V (AC) – 5V (DC)
6 Alarm Digital output 0V (no alarm) 5V (alarm)
7 Synchronism Digital output
Square waveform synchronized to
output voltage (0-5V).
8 Enable Digital output 0V (not enabled) 5V (enabled)
9 GND Ground
Digital input circuit Digital output circuit