Elesa CE.99951, Руководство по эксплуатации

Страница: 4 / 24

4
EN
MPI-R10 Magnetic measuring system
Models all rights reserved in accordance with the law.
Always mention the source when reproducing our drawings.
Setup/Commissioning
In case of any abnormal behaviour (including change in operating conditions), the
device must be switched off immediately. It is imperative to switch off power supply
during any installation work at the equipment. Installation and commissioning by
correspondingly trained and authorised staff only. After correct mounting and
commissioning the device is ready for operation.
Maintenance/repair
Switch off the power supply of the equipment before any action. Maintenance
should be performed by trained and authorised persons only.
2. System description
The MPI-R10, made of a LCD multifunction display that connected with a dedicated
sensor FC-MPI, combined with the Elesa magnetic band M-BAND-10, is a
complete system for the measurement of linear and angular displacement.
Characterised by extremely easy assembly, it allows precise alignment and
positioning, reducing times and machining procedures to a minimum.
Features
• 7-digit LCD of 12,0 mm height and special characters.
• Programmable with 4 multifunction keys.
• Absolute / incremental mode.
• Programmable offset and targets function.
• Lithium battery powered.
• Accidental polarity inversion protection.
mm-inch ABS-REL ORG SET
10
15
11
26
4 17 4
9.5
Ø3.5
20.
5
16.
5
12
A
A B
B
72
37
28
7
21
17.5
MPI-R10 FC-MPI