4
General
If a direct or indirect hazard to personnel cannot be ruled out, additional measu-
res (e.g. covers, barriers, etc.) must be taken in order to minimise the potential
risk accordingly.
The operator alone is liable for all damage arising from the non-intended use of
the device. The manufacturer assumes no liability for personal injury and ma-
terial damage caused through misuse or procedural errors, improper use and
commissioning.
The device must only be operated by trained and authorised specialist staff who
comply with all safety instructions.
The safe and error-free use and operating safety of the device can only be gu-
aranteed on the basis of the intended use according to the information in this
Assembly Manual.
Intended use includes observation of and adherence to all safety instructions
specified in this Assembly Manual, as well as all applicable regulations of pro
-
fessional associations and the valid legislation regards environment protection.
Adherence to the operating rules prescribed in this Assembly Manual also form
part of the intended use.
1.4
Foreseeable misuse
Installation different from the intended purpose approved by the manufacturer is
considered foreseeable misuse.
1.5
Warranty and liability
In principle, the General Terms & Conditions of Sale and Delivery of the ma-
nufacturer apply. The Terms & Conditions of Sale and Delivery form part of the
sales documentation and are transferred to the operator upon delivery. Liability
claims for personal injury and material damage shall be excluded if they are the
result of one or more of the following causes:
•
Opening of the device by the customer (breaking the seal)
•
Non-intended use of the device
•
Improper assembly, commissioning or operation of the device
•
Changes to the design and construction of the device without written per-
mission from the manufacturer
•
Operating the device with improperly installed connections and defective or
improperly installed safety and protective equipment
Содержание Insolis 4
Страница 23: ...21 Assembly EN 4 4 General dimension drawing ...
Страница 26: ......