Elenberg DW-500, Инструкция по эксплуатации

Страница: 24 / 28

24
side the dispenser opening. Replace the cap. The dispenser auto-
matically releases the rinse agent into the inal rinse water.
Note: Clean off large particles of food sediments before placing dishes
in the dishwasher.
Using the “Hot-Wash” Feature
If you have connected the washer to a cold water supply, you will
need to leave it in the “Hot-Wash” setting. The “Hot-Wash” fea-
ture gives you the option of washing/drying dishes at high water
temperatures. When activated, the “Hot-Wash” feature energizes a
heating element that will raise and maintain the internal water tem-
perature of the dishwasher at 62℃. Refer to “Front View”, Item 6
CAUTION
Water temperatures this high can cause severe burns/scalding.
Always exercise extreme care when opening and/or entering the
dishwasher during the Hot -Wash cycle.
To activate this feature, set the “Hot” button to the “in” position.
Using the “Econo” Feature:
The “Econo” feature gives you the option of washing dishes at the
temperature of your hot water supply. The heating element will not
come on.
To activate, set the “Hot/Econo” button to the “out” position.
NOTE:
For the dishwasher which not equipped with detergent dispens-
er, when choosing programme, you should chose normal or rapid
wash. If you choose intensive wash, it won’t wash clean.
It’s strongly recommended to use a “3 in 1” tablets for dishwasher,
which contains salt, conditioner and a washing powder.
IMPORTANT
When the “Econo” feature is activated, drying time for the dishes
will be increased. The dishes dry by a “convection” method only.
To speed-up the drying time after the program is complete, Push
the “door open” button and the door pops open to a pre-set con-
vection dry position.