Element4 Bidore 140, Руководство пользователя и инструкция по установке

Страница: 32 / 48

32
INSTALLER INFORMATION
INSTALLATION TIPS
Please read first the general fitting information which one can find on page 4 of this booklet.
IMPORTANT INSTALLATION TIPS FALSE CHIMNEY BREAST:
- The false chimney breast must always be constructed of an non-combustible material;
- Always ventilate the space above the appliance by means of grills or a comparable
alternative with a minimum air supply of 400 cm2;
- For the finish, use special stucco (min 100 degrees C resistant) or glass fibre wallpaper
to prevent discoloration or cracks;
- The false chimney breast and its construction may not rest on the appliance.
- Always use a lintel if the chimney breast is constructed of brickwork. These should not be
placed directly on the appliance.
- If the appliance is to be fitted against a wall with combustible cladding, the cladding must
be removed from the area covered by the surround.
Before building in the Fire, always check that the metal frame is screwed
straight and not too tight to the firebox.
To be able to take out the glass from the front when the fire is built-in, the window trims should eas-
ily be removed. They need a some space which can be given by loosening the 4 bolts (as shown in
picture below) a bit.
32
INSTALLER INFORMATION
INSTALLATION TIPS
Please read first the general fitting information which one can find on page 4 of this booklet.
IMPORTANT INSTALLATION TIPS FALSE CHIMNEY BREAST:
- The false chimney breast must always be constructed of an non-combustible material;
- Always ventilate the space above the appliance by means of grills or a comparable
alternative with a minimum air supply of 200 cm2;
- For the finish, use special stucco (min 100 degrees C resistant) or glass fibre wallpaper
to prevent discoloration or cracks;
- The false chimney breast and its construction may not rest on the appliance.
- Always use a lintel if the chimney breast is constructed of brickwork. These should not be
placed directly on the appliance.
- If the appliance is to be fitted against a wall with combustible cladding, the cladding must
be removed from the area covered by the surround.
Before building in the Fire, always check that the metal frame is screwed
straight and not too tight to the firebox.
To be able to take out the glass from the front when the fire is built-in, the window trims should eas -
ily be removed. They need a some space which can be given by loosening the 4 bolts (as shown in
picture below) a bit.