Elem Garden Technic BVT50-159CC, Оригинальное руководство пользователя

Страница: 38 / 56

WARNING
This appliance is
equipped with rotating
knives!
Disconnect the spark
plug.
Remove the spark plug
from the spark plug for
any maintenance or other
work on the machine, or
when you leave it
unattended.
§ If the fuse blows or if the overload protection
is triggered, this is a sign that the machine is
overloaded and/or that too many appliances
are connected to the same extension cable.
Check the cause and remedy. Do not install a
more powerful fuse.
§ Do not tug on the extension cable. Do not
hold the cable taut. This can cause damage in
the plugs or in the cables insulation. Such
damage is invisible but can be dangerous.
§ Always keep the extension cable away from
the machine. Disconnect the plug from the
electric socket and check the cable regularly
for signs of damage or aging. Do not use the
machine with a damaged extension cable.
§ If the cable is damaged, it must be replaced
by an authorized service centre in order to
avoid a hazard.
§ Never move the machine by pulling the
cable. The machine must not be moved with
the motor running.
§ The shredder must be assembled correctly
before use.
§ Warning! This appliance must be earthed!
§ Warning! Use only three core extension
cables with the earth wire connected.
§ Only use extension cables that are approved
for outdoor use and check that they are in
good condition before use.
§ Before inserting the plug in the mains
socket, make sure that the socket ratings are
correct
and correspond to those indicated on the rating
label on the shredder.
§ Always switch off the shredder before
disconnecting any plug and socket connector
or extension cables.
§ Keep children and pets away. All onlookers
should be kept a safe distance away from the
shredder when it is in use.
§ Do not allow children or any person who has
not read this instruction leaflet or who is not
familiar with the shredder to operate it.
§ The operator is responsible for third parties
while working with the shredder.
§ Only use the shredder for its intended
purposes.
§ Caution! There are rotating blades on this
machine.
§ Caution! Blades do not stop immediately
after switching off.
§ Always switch off the shredder, disconnect
the plug and wait until the cutting disc stops
before carrying out maintenance or cleaning
work.
§ It is forbidden to move or modify any of the
electrical and mechanical safety devices.
§ Use only in daylight or good artificial light.
§ Do not put your hands into the feed funnel or
ejection slot.
§ If the shredder should start to vibrate
abnormally, switch off the motor and check for
the cause immediately. Vibration is generally a
warning of trouble.
§ Ensure blades are secure before shredding.
Do not operate the shredder if any of the
blades are not properly mounted.
§ The shredder should be checked carefully
before use. You should only work with a
shredder that is in good condition. If you notice
any defect on the machine that may cause
danger to the operator, do not operate the
shredder until defects are rectified.
§ Replace worn or damaged parts for safety.
Use only original spare parts. Parts not
produced by manufacturer may cause poor fit
and possible injury.
§ Use the shredder only in places where it is
protected from water and never use it outdoors
in rainy weather.
§ Store in a dry secure place out of reach of
children, § This appliance is not intended for
use by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for
their safety.