Elem Garden Technic BVT50-159CC, Оригинальное руководство пользователя

Страница: 45 / 56

Blade Maintenance
Warning! Before
removing Top Hopper
knob, ensure the
machine is switched off,
and the machine is
completely stopped.
Warning! If ejection
chute becomes clogged
or cutting blades
become jammed under no
circumstances should
you place your hands in
ejection chute to try to
clear obstruction, as this
will lead to serious injury.
§ Switch the machine off, and make sure the
machine is completely stopped.
§ Loose four screws as shown on carefully lift
up the hopper.
§ Dismantles bit anchor screw 2pcs with the
suitable tool.
§ Sharpen or replace the blades, then tighten
the screws.
§ Closes the hopper, and then tighten the
screws.
Change oil
§ Let engine runs out of fuel, and wait until
engine stopped and cooled slightly.
§ Disconnect spark plug wire and keep away
from spark plug.
§ When engine is still warm, remove oil drain
plug. Drain oil into a proper container.
§ Clean the oil drain plug before restoring it
back.
§ Place engine level. Remove dipstick. Add
new recommended oil about0.3L slowly to
upper limit on dipstick, don’t overfill.
§ Replace dipstick.
Warning! Prevent skin
contact with used
engine oil. Wash your
skin with soap and water
after oil change.
Caution: Used oil is a
hazardous waste
product. It is suggested
to bring used oil to your
local recycling center
with properly seald
container. Do not
discard with household
waste.
Air cleaner maintenance
A dirty air filter will increase air intake
restriction. Periodical maintenance for air filter
will help to improve engine performance and
reduce emissions.
Warning! Never clean air
filter wit gasoline or an
easy ignited solvent it
may cause explosion.
§ Remove the air cleaner cover (A), and
carefully remove the filter element (B).
§ Clean all parts
§ Blow off dirt from filter element with pressure
air.
§ Reinstall the filter element and air cleaner
cover.