Elem Garden Technic BVT50-159CC, Оригинальное руководство пользователя

Страница: 43 / 56

Note: Always pull starter rope straight out.
Pulling starter at an angle will cause rope to
rub against the eyelet. This friction will cause
the rope to fray and wear more quickly. Always
hold starter handle when rope retracts. Never
allow rope to snap back from extended
position. This could cause rope to snag or fray
and also damage the starter assembly.
Warm engine start
§ Move On/OFF switch to “ON” position.
§ Pull the starter rope until the engine start up.
To stop engine
§ Move ignition switch to the “STOP” position.
Top Hopper-front cut
The large sloping front chute of the Top
Hopper is designed to accept leaves and small
garden clippings. Shredding and mulching is
achieved by natural suction of the debris
through the blade chamber.
Do not overfeed and do not feed wet, soggy
material into the shredder as this may clog the
blade chamber and the discharge chute.
Top hopper-back chute
The smaller back chute of the top hopper
accepts medium to larger size garden
clippings.
Shredding and mulching is achieved through
the same action as the front chute. If a finer
type mulch is required, re-feed the mulch
through again until the desired result is
obtained.
Material Push stick
User supplied push stick to push remaining
material into hopper opening.
DO NOT USE HANDS.
10 MAINTENANCE
Warning! Priors to any
maintenance, to stop
engine and switch it off
first.
Warning! Disconnect
spark plug wire from
the spark plug to
prevent unintentional
engine starting.
Warning! Unintentional
sparking can result in
fire.
Warning! Unintentional
start-up can result in
entanglement, traumatic
amputation, or laceration.