Resistance Welder MULTISPOT MI-100
Operation
37
6.5.2
Pulling-out dents with washer
1.
Grind the damaged area to a bright metal finish.
2.
Insert contact piece (Fig. 43) into welding gun.
3.
Select "washer" mode and sheet thickness on display.
(Sheet steel thickness more than 2 x 1.5 = 3 mm
cannot be selected).
Fine-/–.
4.
Position welding gun with washer in the area of the
dent.
5.
Press release button of the gun.
6.
Hook pulling tool into the washer (Fig. 44) and carefully
beat out the dent.
7.
Remove washer by twisting. Only twist the washer off,
otherwise holes in the sheet steel could result.
Fig. 43: contact piece UB
Fig. 44: Pulling tool
Note
!
8 mm Washer. Always beat out major dents from the outside, working inwards.
Use bright washers instead of galvanized.
Adjust setting on display according to size and type of the dent, if necessary.
