Resistance Welder MULTISPOT MI-100
Health and safety
14
2.7.2
Signs on the backside
Fig. 3: Warning sign on the backside
Meaning
Do not operate pump without cooling water.
Pump running dry may sustain damage.
CAUTION
Pump may sustain damage when running dry.
Pump running dry may sustain damage. Therefore:
–
Before starting up, check cooling water level at the
level gauge.
–
If necessary (i.e. if you can't see water in the level
gauge), fill up. (
See "5.2".)
2.7.3
On the balancer
Fig. 4: Warning sign on balancer
Meaning
Always pull in the direction the guiding wheels are pointing.
In the event of lateral and/or transverse pull, there is a danger
the wheels jam/block and the equipment tips over.
CAUTION ! Tipping and toppling may cause damage to property.
This equipment's centre of gravity is relatively high. In the event the wheels jam and/or block (due
to an obstacle or transverse pull, for instance), there is a danger the equipment tips over.
Therefore:
Move this equipment always using the handles.
Keep potential obstacles out of the work area.
Install cables and supply lines in such a way that they do not constitute a stumbling trap.
2.8 Spare and wear parts
WARNING ! Wrong spare and wear parts constitute a hazard.
Wrong and/or defective spare and wear parts may constitute a safety hazard and may entail errors,
damage and even total destruction. Therefore:
Always use genuine spare and wear parts made by the manufacturer.
Be sure to buy your spare and wear parts directly from the manufacturer or an authorised dealer.
For contact information
, see page 2 of this manual.