Elektron Analog Four Скачать руководство пользователя страница 69

Страница: 69 / 130

GLOBAL MENU

• ALL KITS will send all kits to the receiving device.

• ALL PATTERNS will send all patterns to the receiving device.

• ALL SONGS will send all songs to the receiving device.

• ALL GLOBALS will send all global slots to the receiving device.

KIT

will send the selected kit to the receiving device. An asterisk at the end of the kit name

indicates the kit is not linked to any pattern.

SOUND

will send the selected Sound to the receiving device.

PATTERN

will send the selected pattern to the receiving device. To the right of the pattern slot,

the name of the kit linked to the pattern is visible. An asterisk indicates the pattern is not linked
to a kit.

P KIT

will send the send the selected pattern plus its associated kit to the receiving

device.

SONG

will send the selected Song to the receiving device.

GLOBAL

will send the selected Global slot to the receiving device.

•

Backing up your data regularly is important!

•

Before initiating a SysEx send, first make sure the receiving device is listening for data to be sent.

SYSEX RECEIVE

Here kits, Sounds, patterns, songs and global slots can be received from an external device via the MIDI IN port
or the USB port of Analog Keys.

The column to the left selects what will be received. Select the column using the

[LEFT]

arrow key. Use the

[UP]

[DOWN]

keys or the

SOUND SELECTION

wheel to scroll through the column. The SysEx data receive

alternatives located in the column to the right will change depending on the selection made in the left column.
Press the

[RIGHT]

arrrow key to access this column. Use the

[UP]

[DOWN]

keys or the

SOUND SELECTION

wheel to select what will be received. Press

[YES/SAVE]

to initiate the SysEx receive procedure. Analog Keys

will start listening to incoming data. Press

[NO/RELOAD]

to stop listening.

ANYTHING

will listen to and receive any viable SysEx data sent.

KIT

• ACTIVE KIT will when receiving kit SysEx data replace currently active kit with the
received kit.

• KIT 01-128 will store a received kit to the selected kit slot. An asterisk at the end of
the kit name indicates the kit is not linked to any pattern.

Содержание Analog Four



































































































































Результаты поиска

Содержание Analog Four

Отзывы:

Бренды по названию

Популярные бренды

Elektron Analog Four, Полное руководство пользователя

Результаты поиска

Содержание Analog Four

Отзывы:

Бренды по названию

Популярные бренды