Elektron Analog Four Скачать руководство пользователя страница 35

Страница: 35 / 130

KITS AND SOUNDS

SOUND MANAGER

can be regarded as a more powerful version of the SOUND BROWSER. Here Sounds can

be saved, loaded, tagged et cetera. Opening the menu will show a list of all Sounds residing in either the +Drive
Sound library or the Sound pool. Scroll the list by turning the

SOUND SELECTION

wheel or by pressing

[UP]

[DOWN]

Pressing

[LEFT]

will access the SORTING menu. The available commands are the same as those found in the

SORTING menu of the SOUND BROWSER. Read more about the SORTING menu on page 26.

Pressing

[RIGHT]

will access the SOUND OPERATIONS menu. The available operations will affect the cur-

rently highlighted Sound. Press

[YES/SAVE]

to apply the commands to the selected Sound. Press

[NO/

RELOAD]

or the

[LEFT]

arrow key to exit the menu.

LOAD TO TRACK

loads the selected Sound to the active track and makes it a part of the

active kit.

COPY TO POOL

copies the selected Sounds to the first free slots of the active project Sound

pool. This command is only available when browsing the +Drive Sound library.

COPY TO +DRIVE

copies the selected Sounds to the first free slots of the +Drive Sound

library. This command is only available when browsing the Sound pool of the active project.

STORE TRACK SOUND

saves the active track Sound to the selected slot.

[YES/SAVE]

[SOUND]

offers a short cut to this operation.

RENAME

will rename the selected Sound.

EDIT TAGS

opens a menu where Sounds can be tagged. Sounds can have any number of

tags, but only the first two will be shown in the Sound list. Apply or remove tags by pressing

[YES/SAVE]

DELETE

will delete the Sound.

TOGGLE

will enable or disable write protection for the selected Sounds. When a Sound is

write protected it cannot be overwritten, renamed, tagged or deleted.

SEND SYSEX

sends the selected Sounds as SysEx data.

SELECT ALL

selects all Sounds in the list.

DESELECT ALL

deselects all Sounds in the list.

Содержание Analog Four



































































































































Результаты поиска

Содержание Analog Four

Отзывы:

Elektron Analog Four, Полное руководство пользователя, Страница: 35 / 130

Результаты поиска

Содержание Analog Four

Отзывы: