Elektron Analog Four Скачать руководство пользователя страница 25

Страница: 25 / 130

PROJECTS

•

The currently active project is linked to the slot indicated by a small arrow in front of the project
name.

•

Projects can be copied/cleared/pasted in the LOAD PROJECT and SAVE PROJECT menus.

•

A lock symbol indicates the project is write protected.

PROJECT MANAGER

launches the PROJECT MANAGER menu. Selecting a project in this menu and press-

ing the

[RIGHT]

arrow key will bring up a list of commands.

CLEAR

resets the project slot to a clean state.

INIT NEW

initializes an empty file slot with a clean project. This operation is only available for

empty project slots.

DELETE

removes the project from the slot.

RENAME

opens a screen where you can rename the project file.

LOAD FROM

loads the selected project. This will overwrite the active project!

SAVE TO

saves the active project to the selected slot.

TOGGLE

toggles write protection on or off. Write protected projects can not be overwritten,

renamed or erased. A write protected project is indicated by a lock symbol.

•

Multiple projects can be selected and deselected by highlighting them and pressing [YES/SAVE].

•

The currently active project is linked to the slot indicated by a small arrow in front of the project
name.

•

Projects can be copied/cleared/pasted in this menu.

•

LOAD FROM in the PROJECT MANAGER will overwrite the active project. Be sure to save your
project before you load another.

Содержание Analog Four



































































































































Результаты поиска

Содержание Analog Four

Отзывы:

Бренды по названию

Популярные бренды

Elektron Analog Four, Полное руководство пользователя

Результаты поиска

Содержание Analog Four

Отзывы:

Бренды по названию

Популярные бренды