Elektron Analog Four, Полное руководство пользователя

Страница: 103 / 130

Appendix C: CV TRACK PARAMETERS
C-1
Appendix C: CV TRACK PARAMETERS
In this appendix, the CV/Gate track parameters are explained.
CV A-D
The CV A-D pages control the signals sent from the 2 dual CV/Gate outputs. Depending on the CV type chosen in the
CV CONFIG menu, the available parameters will change.
CV (GROUNDED)
No parameters available. The CV output will not send any signal.
CV (PITCH V/OCT)
TUN (Coarse Tune) sets the coarse tuning of the CV in semi-
tones.
FIN (Fine Tune) sets the fine tuning of the CV.
BND (Bend Depth) sets the bend depth. The higher the setting,
the more the pitch of a trigged note will be offset.
SLI (Note Slide time) sets the CV control of the slide time of note
slides.
SRC (Source Track) sets the track to use for sending CV signals.
The CV track, FX track and synth tracks 1-4 can be used as
source.
A note on the LCD graphics: The audio plug graphics on the CV
A-D PARAMETER pages will flash to indicate whether the tip or
the ring of the audio cable plug is used for sending the CV/Gate
signals.