Elektro-Automatik PSI 9000 DT Series, Руководство по эксплуатации

Страница: 17 / 76

Page 17
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
ea1974@elektroautomatik.de
PSI 9000 DT Series
1000 W
Model
PSI 9360-10 DT PSI 9500-06 DT PSI 9750-04 DT
Power regulation
Display: Resolution See section
„1.9.5.4. Resolution of the displayed values“
Display: Accuracy
(2
≤ 0.8% P
Max
≤ 0.8% P
Max
≤ 0.8% P
Max
Efficiency
(4
≈ 92% ≈ 92% ≈ 92%
Internal resistance regulation
Adjustment range 0...1100.6 Ω 0...2295 Ω 0...5317.5 Ω
Accuracy
(1
≤ 1% of max. resistance ± 0.3% of maximum current
Display: Resolution See section „1.9.5.4. Resolution of the displayed values“
Analog interface
(3
Set value inputs U, I, P, R
Actual value output U, I
Control signals DC on/off, remote control on/off, resistance mode on/off
Status signals CV, OVP, OCP, OPP, OT, PF, DC on/off
Galvanic isolation to the device Max. 400 V
DC
Sample rate of inputs 500 Hz
Insulation
Output (DC) to enclosure (PE)
DC minus: permanent max. ±400 V
DC plus: permanent max. ±400 V + output voltage
Input (AC) to output (DC) Max. 2500 V, short-term
Miscellaneous
Cooling Temperature controlled fan, side inlet, rear exhaust
Ambient temperature 0..50°C
Storage temperature -20...70°C
Humidity < 80%, not condensing
Standards
EN 60950:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 + A2:2013
EN 61236-1:2013-07
Overvoltage category 2
Protection class 1
Pollution degree 2
Operational altitude < 2000 m
Digital interfaces
Featured 1x USB-B for communication, 1x USB-A for functions, 1x LAN for communication
Galvanic isolation from device Max. 400 V
DC
Terminals
Rear side AC input, analog interface, USB-B, Ethernet
Front side DC output, USB-A, remote sensing
Dimensions
Enclosure (WxHxD) 276 x 103 x 415 mm
Total (WxHxD) 308 x max. 195 x min. 451 mm
Weight 8.15 kg 8.15 kg 8.15 kg
Article number 06200508 06200509 06200510
(1 Related to the nominal values, the accuracy defines the maximum deviation between an adjusted values and the true (actual) value.
(2 The display error adds to the error of the related actual value on the DC output
(3 For technical specifications of the analog interface see „3.5.4.4 Analog interface specification“ on page 54
(4 Typical value at 100% output voltage and 100% power