Page 76
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
EL 9000 B 15U/24U Series
3.10.15
Remote control of the function generator
The function generator can be remotely controlled, but configuration and control of the functions with individual
commands is different from manual operation. The external documentation “Programming Guide ModBus & SCPI”
on the included USB stick explains the approach. In general the following items apply:
•
The function generator isn’t directly controllable via the analog interface; the only impact to the function run can
come from pin REM-SB switching the DC input off, which will pause the function, so it could continue later with
pin REM-SB switching the DC input on again and in case the function hasn’t been stopped otherwise.
•
The function generator is unavailable if R mode (resistance) is activated
