Elektro-Automatik 39 200 120, Руководство по эксплуатации

Страница: 19 / 28

Page 19
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
ea1974@elektroautomatik.de
PS 2000 B Triple Series
3.4 Manual operation
Both displays and the related control elements are identical in the layout and handling. As long
as tracking mode isn’t active, both HMIs are completely separate, even in their HMI settings.
3.4.1 Switching the device on
The device should, as far as possible, always be switched on using the toggle switch on the front of the device.
After switching on, the display will first show the manufacturer’s logo, name and address, followed by device type,
firmware version(s), serial number and item number. The latest set values are restored.
A PS 2000 B device doesn’t restore the DC output condition. It will always come up with DC off.
3.4.2 Switching the device off
• Cutting the AC supply, no matter if caused by using the power supply or a blackout, doesn’t leave the device
enough time to store the latest values. It’s practically powered down immediately. Thus the device stores the set
values and all settings automatically when they are altered, but only in intervals of 10 seconds. It means, if you
would have changed some settings in the menu, you should wait at least 10 seconds after leaving the menu
and before switching the device off.
3.4.3 Configuration via menu
The setup menu serves to configure some operating parameters which are not changed frequently. These can be
set by pressing button Settings , but only while the DC output is switched off .
Menu navigation is done using the rotary knobs, their pushbutton
function and the Settings button. Following is defined:
• Settings button: open menu or leave menu
• Left knob (turn): select a menu item or parameter
•
Left knob (push): enter selected menu or leave sub menu
•
Right knob (turn): adjust the selected value
• Right knob (push): move cursor
The setup menu has two levels. In order to leave the 2. level to the
1. level and instead of exiting the menu, you can select the item
Menu in the upper left corner and push the knob.
