Elektro-Automatik 39 200 120, Руководство по эксплуатации

Страница: 11 / 28

Page 11
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
ea1974@elektroautomatik.de
PS 2000 B Triple Series
Overview
For a detailed description of the display and its layout see section
«1.9.4. The control panel (HMI)».
The HMIs of
the outputs 1 and 2 are identical.
(1)
Power switch
Used to power the device on and off.
(2)
Pushbutton “Settings”
Used for access to the setup menu while the DC output is switched off.
(3)
Color display
Used for display of set values, menus, actual values and status.
(4)
Rotary knob with push button function
Turn: adjustment of the voltage set value or selection of parameters in the menu
Push: selection of the decimal position (cursor) of the currently assigned value
(5)
USB port
Used to connect the device to a PC or other control hardware to establish communication and remote control
(6)
Rotary knob with push button function
Turn: adjustment of the current set value or adjustment of parameter value in the menu
Push: selection of the decimal position (cursor) of the currently assigned value
(7)
Pushbutton “On/Off”
Used to switch the DC output oon or off, unless the HMI is fully locked or remote control is active. Is also
used to acknowledge, i. e. clear alarms before the DC output on again.
(8)
Connectors of DC output 1
The red and black safety sockets form a poled DC output. They allow for the use of specific 4 mm safety
plugs with or without retractable shell.
(9)
Connectors of DC output 2
The red and black safety sockets form a poled DC output. They allow for the use of specific 4 mm safety
plugs with or without retractable shell.
(10)
Connectors of DC output 3
The red and black safety sockets form a poled DC output. They allow for the use of specific 4 mm safety
plugs with or without retractable shell. Its output voltage can be adjusted with a trimmer (small hole be-
tween the sockets). The LED indicates constant voltage operation, it means it’s lit as long as the maximum
current isn’t reached.
(11)
PE socket
4 mm socket which can be used to ground one of the output poles on the three DC outputs and/or external
hardware.