elektraLite MY575w Скачать руководство пользователя страница 3

 -                                     MY575 WASH 

Safety Instructions.

 

This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe 
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in 
this user manual. 

MY575w 

is a high voltage fixture. Be careful when dealing with high voltages.     

Please read this manual. If you do not read this manual and damages occur to MY575w, then it could 
void the warranty.   

During shipping, 

MY575w

 may have been exposed to high temperature changes or humidity changes. So, as a 

precaution, do not switch 

MY575w

 on immediately. Condensation can damage 

MY575w 

so leave 

MY575w

 

switched off until it has reached room temperature. 
The electric connection must carry out by a qualified person and it is absolutely essential that 

MY575w

 be 

grounded

 
Always disconnect 

MY575w 

from the power source, when the device is not in use or before cleaning it. Only 

unplug 

MY575w

 from the power cord. Never pull out the plug out by pulling on the power cord. 

Take care, MY575w will heat up when it is turned on and it will be very hot to touch. 

 
Please keep 

MY575w 

away from children and the general public. Please be intelligent and use common sense 

when operating 

MY575w. 

 

General Guidelines.

 

MY575w

 is a lighting fixture for professional use on stages, in clubs, theatres, etc. 

MY575w 

should only be operated at 120 volts and only indoors. 

MY575w 

should not be operated 24/7 (24 hours a day; 7 days a week). 

MY575w 

needs operation breaks to 

ensure that it will work for a long time without problems. Please do not shake 

MY575w 

and avoid using brute 

force when installing or operating it.   
 
When choosing the location to install 

MY575w

, please make sure that it is not exposed to extreme heat, 

moisture or dust. The minimum distance between 

MY575w 

and the illuminated surface must be more than 3 

feet. 
 
Always mount 

MY575w 

with an appropriate safety cable. If you use the quick lock cam to hang 

MY575w

please make sure the 4 quick lock fasteners are 

locked into position correctly. 

   
Operate 

MY575w

 only when you are familiar with the features on the fixture. Do not permit operation by 

persons not qualified for operating it.   
All modifications to 

MY575w will invalidate the warranty. There are absolutely no exceptions.

 

 
If 

MY575w 

is operated in any way different to the one described in this manual, 

MY575w 

maybe damaged and 

the guarantee will be void.   

 

Содержание MY575w

























Отзывы: