elektraLite MY575w, Руководство пользователя, Страница: 12 / 24

-
１１
- MY575 WASH
- Main menu 2
1. Press [ENTER] for 3 seconds to enter the main menu (display flashing).
2. Press [UP] to select “SET” .
- Pan Reverse
With this function you can reverse the Pan-movement.
1.
Select “rPAN” by pressing [UP] button.
2. Press [ENTER] , the display shows “ON” or “OFF” .
3. Press [UP] to select “ON” if you wish to enable this function or “OFF” if you don’t.
4. Press [ENTER] or [EXIT/DN] to exit.
- Tilt Reverse
With this function you can reverse the Tilt-movement.
1.
Select “rTIL” by pressing [UP] button.
2. Press [ENTER] , the display shows “ON” or “OFF” .
3. Press [UP] to select “ON” if you wish to enable this function or “OFF” if you don’t.
4. Press [ENTER] or [EXIT/DN] to exit.
DEGR- Pan degree selection
With this function you can set the maximum pan to be either 540 or 630 degrees.
1.
Select “Degr” by pressing [UP] button.
2. Press [ENTER] , the display shows “630” or “540” .
3. Press [UP] to change the selection.
4. Press [ENTER] to save and then [EXIT/DN] to exit.
- Switch 16 bit/8 bit
With this function you can switch MY575 from 16 bit to 8 bit resolution.
1. Select “16BI” by pressing [UP] button.
2. Press [ENTER] , the display shows “ON” or “OFF” .
3. Press [UP] to select “ON” in order to set 16 bit, or “OFF” in order to set 8 bit. The channels PAN Fine
and TILT Fine will be disabled.
4. Press [ENTER] or [EXIT/DN] to exit.
- Reset
With this function you can Reset MY575 via the Display Panel.
1. Select “rEST” by pressing [UP] button.
2. Press [ENTER] , the display shows “ON” or “OFF” .
3. Press [UP] to select “ON” if you wish to enable this function or “OFF” if you don’t.
4. Press [ENTER] or [EXIT/DN] to exit.
- Restore factory settings
With this function you can restore the factory settings of MY575 . All settings will be set back to the default
values (shaded). Any edited scenes will be lost.
1.
Select “LODA” by pressing [UP] button.
2. Press [ENTER] , the display shows “ON” or “OFF” .
3. Press [UP] to select “ON” if you wish to enable this function or “OFF” if you don’t.