background image

  

 

26

 

 

Never operate your Vending Machine if there is no Norm Earthed Mains 
Supply. 
 

10.2 Frequently Asked Questions                

 
In this section you may find information about Frequently Asked Questions regarding 
Installation and the use of your vending machine. 
 

10.2.1   General Questions: 

 

 

There is no Earth / Grounding on Mains Supply. What should I do? 

Do not operate your Vending Machine without earthed electricity power supply. Operation 
without earthed supply is risky and may have serious consequences in respects of operation 
and safety.  

 

 

Can I directly interfere or should I get in contact with a technician, when 
there is a problem with the vending machine? 

If the problem is not solved after trying all procedures given in the User’s Manual, you may 
contact our technical service. Any maintenance job done by third parties will void the 
Vending Machine Warranty Terms. 

 
 

 

How many hours a day can the Vending Machine operate? 

Your Vending Machine is designed to operate 24 hours/day year round basis. 
 

 

How can I clean the Machine? 

Do not use water directly to clean the Machine. Use dry or damp cloth for cleaning. 

 
10.2.2 Operational Questions:

 

 

 

Does long time non-operational storage require settings and maintenance? 

Proper storage conditions do not require any additional settings and/or maintenance before 
use.  

 

 

One of the motors is not operating, what can I do? 

First of all control the PINS inside the Motor Socket. Then in sequence check the 10 PIN 
Sockets and Cables in the Connectors connecting to the Electronic Board.

  

 

 

WARNING: Please do not force the sockets and PINS. The sockets are 
easy to connect and disconnect.  

 

  

 

I forgot my Password, what can I do?

 

Please get in contact with our Technical Service Department with the Warranty Card. 

 

Cooling Unit is not operating, what should I do? 

 

The Cooling Unit may have been deactivated from the menu. Please check Chapter 

4.2.1.3. Front door may be open. There should not be “1” Door Open warning on 

the LCD screen. 

All Three LEDs on the Power Distribution Board Electronic Module 

(Chapter 2) must be in lit position. 

 

 

 

 

Содержание TRU-VEND Maxi-Buffet






























Отзывы: