11
WARNING: When pulling the trays out, make sure the front door is
opened with a 180° angle. Otherwise the Rubber Front Door Gasket can
be damaged.
2.2 Control Panel
All operational controls can be followed on the Graphical LCD Screen, also Payment Systems
and Touchpad Keypad are installed on this panel.
2.2.1 Capacitive Touch Keypad
This is used for selecting products and vending machine settings,
explained in details under programming section. (IP 65 Weather
proof Anti-vandalism Metal Keypad is Optional.)
2.2.2 Graphical LCD Screen
All operations are being displayed on the Graphic Liquid Crystal
Display-GLCD for easy usage. Will be referred as GLCD thereafter.
2.2.3 Payment System (Optional)
Coin Selector accepts pre-defined coins for the payment
processing. It recognizes the domestic currency which had been
programmed. The mechanism will not accept the currency which
has not been defined and will be returned through the Coin Return
Chute.
The system has Automatic Currency Recognition feature as per the
assembled Payment System.
The Vending Machine which is eligible for MDB protocol can be
equipped with Change Giver, Coin Selector, Bill Validator and/or a
combination of Bill Validator and Change Giver, Cashless Payment
Systems as per customers’ choice.
Please note that the Payment System is Optional and not all Maxi
Buffet Vending Machines are Equipped with a Payment System.
2.2.3.1 Coin Selector
Accepts coins only. This equipment can accept different types of
coins. There is no Change Function.
2.2.3.2 Change Giver
There are 4 tubes (may change as per the ordered model) where the coins are being
collected for change giving. The coins of the main currency defined to the device are being
collected in these 4 tubes to be used later for change giving. Once the tubes are full, coins
are sent to the Cash Box under the Change Giver Unit automatically. The coins are collected
in the Cash Box.
Please check Chapter 4.2.1.1 for the settings of the Change Giver Unit.
