27
26
WATER DOES NOT COME OUT OF A DISPENSING GROUP WHEN THE
MANUAL BUTTON IS USED
The possible causes of this are:
-
Coffee ground too finely: adjust it
-
Water supply stoppage: restore it
-
Fault or obstruction to the passing of water through some parts of the machine: contact
Technical Assistance
8
ONE DISPENSING GROUP DOES NOT HEAT SUFFICIENTLY
There is a reduction to the flowing of the brewing water, e.g:
- Group natural heating circuit clogged with scale deposits.
Contact Technical Assistance
BREWING PRESSURE GROUP DOES NOT HEAT SUFFICIENTLY
Unless this value exceeds 1.2 MPa (12 Bar), in which case switch off the machine and
contact Technical Assistance, this is a fault that does not negatively affect the use of the
machine.
The most likely causes are that the pump is out of calibration or worn.
Contact Technical Assistance.
10
THE DRIP TRAY IS FULL AND OVERFLOWING WITH WATER
1) Clean the drain box and use a metal wire to free the drain pipe of residue.
2) Eliminate any sagging or strangling of the flexible drain pipe, ensuring that it is always
angled downwards in a straight and even manner.
3) If the above-mentioned causes are not responsible for the fault, this means that there is
a blockage in the drain pipes external to the machine: contact a plumber.
Also consult chapter “B - INSTALLATION”, paragraph 3.
9
11
DISPOSAL OF THE APPLIANCE
D
The European Directive 2012/19/EU (WEEE) covering the disposal of electric and electronic
equipment dictates that such equipment must not be disposed of through normal solid urban
waste channels.
When such equipment has reached the end of its useful life, the user is bound take to
deliver it to authorized segregated waste collection centres or return it to the dealer on
purchasing a new equivalent type of appliance, on a one-to-one ratio .
For further information on segregated waste collection centres, contact a dealer or the
appropriate public authorities.
Effective segregated waste collection designed to subject the disposed equipment to
environmentally compatible recycling, processing and disposal processes contributes to the
avoidance of negative effects on the environment and on health, and enables the re-use of
the materials of which the appliance is composed.
Improper disposal of the product by the user is punishable according to the penalties laid
down in the legislation in force.
The crossed-out wheelie bin symbol indicates that the product must be handled
asdescribed above
