background image

11

10

    The use of the appliance entails compliance with the following 
fundamental rules:
- The appliance should be used in environments where the 
temperature does not fall below 5°C or rise above 40°C;
- Do not obstruct the intake and outlet grilles. In particular do 
not cover the upper cup tray with a cloth or such like.
-  The appliance has a water circuit containing water, which 
must not be allowed to freeze otherwise the appliance could 
be damaged;
-  The appliance should not be cleaned using water jets or in-
stalled in a place where water jets could be used for cleaning;
-  The appliance should be installed on the level - it must not 
slope – high enough in order to have the cup heater tray at 
more than 1.5 meter from the floor.
-  Do not touch the appliance when hands or feet are wet or 
damp;
- Do not operate the appliance barefoot;
-  Do not tug the power supply cable;
-  Do not expose the appliance to the elements (rain, sun, etc.): 
it is not suitable for outdoor use.
- The equipment can be used by children aged 8+ and people 
with reduced physical, sensory or mental capabilities, or lack 
of experience or knowledge required, provided they are un-
der supervision or after they have received the same instruc-
tions for a safe use of the equipment and for understanding 
the dangers inherent in it. Children should not play with the 
equipment.
The cleaning and maintenance intended to be performed by 
the user, should not be performed by children without super-
vision     .

Disconnect the appliance from the mains electricity supply 
before carrying out any maintenance, by switching off at the 
mains switch or disconnecting the plug from the socket.
Every time maintenance jobs are carried out on joints for 
connection to the water supply, you must strictly use new 
joints and the old joints must never be reused. 
To clean the appliance, follow the instructions in this booklet.
In the event of failure or malfunctioning of the applian-
ce, switch it off and under no circumstances try to repair 
it yourself. Always request service by a qualified technician. 
Any repair, electrical or mechanical adjustment should only 
be carried out at the factory or by an authorized service cen-
ter using only original spare parts. 
Failure to comply with these instructions could jeopardize 
the safety of the appliance.
The supply cable of this appliance should not be replaced by 
the user.
Should the cable be damaged, switch off the appliance and 
apply solely to a qualified electrician for replacement.
Should the machine be used no longer, it must be made 
inoperative by cutting the supply cable after having discon-
nected it from the electrical power supply.
Make sure that all those parts which could be possible 
sources of danger are made harmless.
Warning: hot surfaces        . 

6

7

 

8

9

Содержание KUP




















Отзывы: