Electronics Logic SP-16, Руководство пользователя

Страница: 6 / 12

MAX. BLOWER POW.
MAX. BLOWER POW.
99 %
6
- MAX. BLOWER POWER this function is to limit
maximum blower power. Maximum power should
be limited when used fuel (pellet, oat) is too light
and is blown around in combustion chamber due
to huge fan power.
- MIN. BLOWER POWER function is to set up
minimum fan power. Fan should be set up to work
at minimum power. However, you should
remember that fans lose their factory parameters
as a result of use and soil. In that situation you
should increase.
4. Technical data
o o
1. CH temperature adjustment range 35 C - 80 C.
o o
2. HSW temperature adjustment range 35 C - 65 C.
3. Automatic blower adjustment.
o o
4. Operation in ambient temperature 0 C - 40 C.
5. Automatic saving of settings during supply voltage decay.
6. Relative air humidity 95%.
7. I insulation class.
8. 3.15 A fuse.
9. Controller has got function preventing from premature freezing of
o
installation, in case of temperature decrease below 6 C circulation
pump starts up automatically.
10. Controller is equipped with secondary protection (emergency thermostat)
which protects the boiler against overheating.
5. Use
1. Connect feeder of CH and HSW pump.
a) yellow-green conductor to earth terminal,
b) blue conductor to "N" terminal,
c) brown conductor to "L" terminal.
2. After connecting the blower, pumps and after installing all sensors turn the
controller on.
3. Controller technical condition should be checked periodically.
After performing above actions the controller ensures:
a) Maintaining constant temperature of CH boiler set up by user.
b) Automatic start of pumps and blower.
c) Automatic shutdown of the blower and pumps after fuel use up.
d) Continuous readout of temperatures.
SP 16 Manual
MIN. BLOWER POW.
MIN. BLOWER POW.
31%