Electronics Line infinite prime, Руководство пользователя

Страница: 23 / 32

-23-
Code 29: Telecontrol Code
The Telecontrol code is designed to enable the user to perform a number of tasks via
their telephone using DTMF commands. Using this code, the user can call their system
to set and unset, turn on and off HA units, activate and deactivate the PGM output,
cancel the sounder or establish Two-Way Audio communication. This code can only be
used for this specific purpose and does not grant access to any additional system
functions such as unsetting.
Editing User Codes
User code editing is a feature that is available exclusively to the Master code. To
maintain a high level of security, keep all user codes confidential.
To edit a user code:
1. From the main menu select, User Codes [4].
2. Select the code you want to edit;
3. From the code’s sub-menu, select Edit Code; the 4-digit code is displayed with
the cursor flashing on the first digit.
4. Edit the code.
5. Press √; the new code is stored in the memory.
If you enter a code that is identical to an existing user code, the panel sounds an error
tone and the new code is not accepted. 0000 is not a valid user code as this value is
used to delete a user code.
Deleting User Codes
As an additional security measure, make certain that you delete any extra codes that
are no longer required.
To delete a user code:
1. From the main menu select, User Codes [4].
2. Select the code you want to delete;
3. From the code’s sub-menu, select Edit Code; the 4-digit code is displayed with
the cursor flashing on the first digit.
4. Enter 0000.
5. Press √; the code is deleted.
The Master code cannot be deleted.
User Code Descriptors
Using the alphanumeric keypad on
the front panel, you can edit the 16-
character user code descriptors and
enter the name or title of the users to
whom the code is allocated.
To enter text, press a key repeatedly to scroll through the characters that appear on the key. For
example, press
6
MNO
to enter M, N, O, or 6 respectively. You can also use the 1 and 0 keys to
enter symbols. After you enter text, the cursor automatically moves to the next character.
To edit a user code descriptor:
1. From the main menu, select User Codes [4].
2. Select a code.
3. From the code’s sub-menu, select Descriptor.
4. Edit the descriptor using the alphanumeric keypad.
5. Press √ when you have finished editing.
During descriptor editing, use this key to enter
a space before the current character.
Use this key to delete the current character.