Electronics Line infinite prime, Руководство пользователя

Страница: 27 / 32

-27-
The second utility, TX Test enables you to identify transmitters.
In TX Test mode, each time a transmission is received, a chime is sounded and the
activated transmitter is displayed.
To initiate TX Test mode:
1. From the Service menu, select Transmitters, TX Test [7072].
2. Activate a transmitter; the transmitter’s details are displayed.
3. When you have finished, press X to exit TX Test mode.
Audio Volume
To adjust the sensitivity of the microphone and the volume of the speaker:
1. Establish a two-way audio connection.
2. From the Service menu, select Audio Volume [708].
3. Adjust the setting according to the following table.
Press To
1 Increase microphone sensitivity
4 Reduce microphone sensitivity
3 Increase speaker volume
6 Reduce speaker volume
4. Press √; the new settings are stored in the memory.
GSM Signal Strength
You can measure the GSM signal strength using the system’s RSSI (Received Signal
Strength Indication) meter.
To view the GSM signal strength reading:
•
From the Service menu, select
GSM Signal [709]; the signal
strength of the cellular network
is displayed.
Display Version
To display the system’s software and hardware versions:
•
From the Service menu, select Version [710]; the software (SW) and hardware
(HW) versions are displayed.
Global Chime
Each sensor can be programmed by your engineer to cause the system to chime when
activated. This feature is active only when the system is unset. For example, the system
can be programmed to sound a chime each time the front door is opened or closed. The
Global Chime option, enables you to turn this feature on and off.
To enable or disable Global Chime:
1. From the Service menu, select Global Chime [712].
2. Select either Enable or Disable.
3. Press
when the desired setting is displayed.
Global Chime can also be accessed via a convenient shortcut without needing to enter a
valid user code. To access the Global Chime option from Standby mode, press
then .
This reading Means
8 to 9 Reception is good
5 to 7 Reception is acceptable
Less than 5 Reception is unacceptable