Electronics Line infinite prime, Руководство пользователя

Страница: 26 / 32

-26-
Sounder Tests
To test the external wireless sounder:
•
From the Service menu, select WL Sounder Test [703]; the wireless sounder is
sounded briefly.
To test the built-in sounder:
•
From the Service menu, select Sounder Test [704]; the built-in sounder is sounded
briefly.
Interface Test
The Interface test enables you to check if the speaker, LEDs and LCD are
functioning correctly.
To test the system interface:
•
From the Service menu, select Interface Test [705]; a short sequence of
chimes are sounded from the speaker, all LEDs flash and the LCD is tested on
all connected LCD keypads.
Walk Test
Walk Test mode enables you to test all the sensors registered to your system without
triggering an alarm.
To initiate Walk Test mode:
1. From the Service menu, select Walk Test [706]; a list of registered sensors appears.
2. Trigger each sensor; when the system receives a successful transmission from
a sensor, the sensor is removed from the list.
3. When all the sensors are removed from the list, End Walk Test is displayed.
Transmitters
The Transmitters menu offers two utilities, TX List and TX Test.
The TX List comprises all registered transmitters and their last reported status.
To view the TX list:
1. From the Service menu, select Transmitters, TX List [7071]; the first transmitter
on the list is displayed.
2. Using the arrow buttons, scroll through the transmitter list.
3. When you have finished viewing, press X to exit the list.
The TX list displays the following information for
each transmitter:
The transmitter’s descriptor
The signal strength of the last received
transmission
An abbreviation indicating the last received
status of the transmitter.
This Means
OK The transmitter is functioning correctly
TA Tamper condition
Notify
your
engineer
BT Battery low
OS The transmitter is out of
synchronization
NA The transmitter is inactive
ΦΡΟΝΤ ΔΟΟΡ
Σ=6 ΟΚ
Press this key to
display the transmitter’s
default descriptor .