Electronics Is Fun GURUMODEM, Руководство пользователя

Страница: 25 / 35

22
COMMAND Description
AT&L Reloads the saved configuration.
AT&W Saves the current configuration:
WiFi settings(ATW), baud rate
(ATB), end of line (ATR) settings,
flow control (ATF), echo mode
(ATE), extended responses (ATX),
verbose responses (ATV), quiet
responses (ATQ), PETSCII mode
(AT&P1), DCD status (ATS46), CTS
status (ATS47).
AT&F Restores the modem to factory
default settings.
AT&On n is 1 to turn on internal serial-
reception log, n is 0 to turn off
or view a previously turned-on
log.
AT&H Shows a help file from the web, or
brief help otherwise.
AT&U Checks the firmware home page to
see if a new version is available.
AT&U6502 Will update the firmware from the
home page on the web.
(BETA) AT&U=x Will update the firmware from the
web to custom version x.
AT&Pn Where n > 0, all command mode
input and output will be
translated to/from PETSCII before
internal processing. This will
not affect received packet data,
or the stream mode.
AT&Nx Shows the status of ESP32 I/O pin
x
AT&Mn Adds the byte denoted by n to a
list of mask-out bytes. These are
bytes that are not transmitted to
the serial port in command mode
incoming packets. If this command
is followed by a C, N, or A
command on the SAME LINE, then the
setting will apply ONLY to that
connection or listener.
AT&M Resets the mask-out bytes list. No
bytes will be masked-out. If this
command is followed by a C, N, or
A command on the SAME LINE, then
the setting will apply ONLY to
that connection or listener.