Electronics Is Fun GURUMODEM, Руководство пользователя

Страница: 23 / 35

20
COMMAND Description
ATP"[NUMBER]=[HOSTNAME]:[PORT]" Adds or Modifies an entry to the
phonebook with the given 7 digit
number, host, and port. Use
ATDnnnnn.. to connect.
ATPP"[NUMBER]=[HOSTNAME]:[PORT]" Adding a P modifier causes
connection input to be translated to
PETSCII when connected to that
entry.
ATPT"[NUMBER]=[HOSTNAME]:[PORT]" Adding a T modifier causes
connection input to be translated
per TELNET when connected to that
entry.
ATPE"[NUMBER]=[HOSTNAME]:[PORT]" Adding a E modifier causes terminal
echo to be enabled when connected to
that entry.
ATPX"[NUMBER]=[HOSTNAME]:[PORT]" Adding a X modifier causes XON/XOFF
flow control to be enabled when
connected to that entry.
ATP"[NUMBER]=DELETE" Removes the phonebook entry with the
given number.
ATS0=n Changes the number of RING messages
received before a CONNECT response
is sent, on incoming Server
listeners.
ATS1=n Unimplemented, always returns OK
ATS2=n Change the escape character (n = 0-
255), Defaults to ASCII decimal 43
("+")
ATS3=n Change the Carriage Return Character
(n = 0-127), Defaults to ASCII
decimal 13 (Carriage Return)
ATS4=n Change the Line Feed Character (0-
127), Defaults ASCII decimal 10
(Line Feed)
ATS5=n Change the Backspace Character (0-
32), ASCII decimal 8 (Backspace)
ATS6 ... 39=n Unimplemented, always returns OK
ATS40=n Change the size of the connection
packets (n > 0), Defaults to 127
bytes
ATS41=n When n > 0, all incoming Server
listener connections are immediately
sent to Stream mode. If n=0,
connections remain in normal command
mode (default).
ATS42=n Set the CRC8 for an expected
incoming Transmit command. e.g.
ATS42=123T"[MESSAGE]" returns error
unless 123 is CRC8 of "[MESSAGE]".
ATS43=n Sets a standby baud rate n for the
next incoming or outgoing connection
only. ATZ clears.