ELECTRONET
UM-ELMAG 200-R3
PAGE 24 OF 34
5] Now, Display will show
Press key. Now the display will blink. The key is used to change time unit.
Press key to store time unit.
6] Display will show
Press key. The numeric digit will start to blink. Press the key to change the position
of decimal point. Press key to store position of decimal point.
7] Display will show
Press key. Display will blink. Press the key to change totaliser unit .
Press key to store totaliser unit.
8] Display will show
Press key. Now the display will blink. Press the key to change the position of
decimal point. Press key to store position of decimal point.
9] Display will show
Press key. Now the display will blink. Press the key to change batch unit .
Press key to store batch unit.
10]Press key. Display will show
Press key. Now the display will blink. Press the key to change the position of
decimal point. Press key to store position of decimal point.
11]Now, Display will show
Press key. The numeric digit will blink. Enter the desired value one by one
using & key.
Press key to store max flow range value.
12]Display will show
Press key. The display will blink. Enter the desired value using & key.
It is the integer value below which the display & the Ret. Output shows the lower limit value.
Press key to store value
Time Unit
Hr
Flow Decimal Pt.
000.000
Totalizer unit
m3
Totl Decimal Pt.
000.000
Batch Unit
m3
Batch Decimal Pt.
0000.00
Max. Flow Range
056.000 m3/Hr
Low Flow cut off
00.0%