STORAGE
AND
WAREHOUSING CONDITIONS
•
The device should be transported and stored
within a temperature range of -10°C to 60°C,
at a barometric pressure of 700hPa to
1060hPa and a relative humidity of 15
to 75% RH non-condensing..
MAINTAINING
AND
CLEANING THE DEVICE
Maintaining and cleaning the device are relatively
simple
• Always store the stimulator and its accessories in
the case provided.
• No maintenance is required for the stimulator. The lifespan
of the device may vary depending on the conditions of
use, but it is generally around 5 years (3-year warranty
on the devices); the accessories may need to be changed
beforehand depending on how the device is used
• Never tamper with the device while in use.
• Never expose the stimulator to water. Wipe the device with
a damp cloth as needed.
• Use the silicone pouch to protect your stimulator at
all times.
• Disconnect wires and fittings carefully and properly.
• You may leave the wires plugged into your stimulator
between treatments.
• BATTERY To maintain the battery amperage at its optimum
level, the battery should be removed from the unit when not
in use for an extended period (approx. 3 months).
• If you use carbon electrodes, use a large amount of
conductive gel and prevent them from drying out by
applying an adhesive tape (supplied in the kit). Rinse the
carbon electrodes and your skin after use. Never use
detergent to clean carbon electrodes
• For self-adhesive electrodes, you can moisten them with
a little water after treatment to restore their adhesiveness.
Keep them in an airtight place (such as a plastic bag ). It
also is important to cover them with their protective film
after use and when they are not in use.
• Contact the manufacturer for help with installing and using
or maintaining the equipment or to report any unusual events.
25
page
7
24
