manualshive.com logo in svg

Electrolux WTCS90ERB, Руководство по обслуживанию

Поделиться
Скачать
Electrolux WTCS90ERB Скачать руководство пользователя страница 8

Electrolux

EFS - Dishwashing Systems Platform
Electrolux Professional

DOC. NO. 5956.573.05

P. 8 / 88

A3.3

CONSUMPTION

A3.3.1

MODULAR RACK TYPES

Press the confirm button (“C” - (Figure 1)) when the selection arrow indicates the item CONSUMPTION and
the display will show the counter of the racks processed by the machine.

The display shows the number of racks starting from the date of machine installation. The number of racks
processed, counted starting from the date indicated opposite, corresponding to the last reset (RESET CONS)
is also displayed.

In fact the rack counter can be reset by pressing the confirm button; in this way the “CONSUMPTION RESET”
mode is accessed.

Press the confirm button again to reset the resettable rack counter.
The rack counter is reset and the date and time of the last reset are saved.
If the last counter reset occurred in the factory, the message FAC appears next to the reset time.
Press the additional functions button to exit the  “CONSUMPTION RESET” mode.
Use the increase and decrease buttons to display the screens relevant to:

-

rinse module water consumption (litres)

-

wash module water consumption (litres)

-

prewash module water consumption (litres)

-

machine power input (kwatt/h)

WARNING:

To have the above information  the machine must be equipped with suitable flow meters (water con-
sumption) and/or a suitable energy measurer  and  the Pulse/lit rinse, Pulse/lit wash, Pulse/lit pre-
wash, Pulse/kWattH parameters must be correctly set.

Also these screens provide for 2 counters, one resettable and the other non-resettable, usable as  described
above.

A3.3.2

COMPACT SHORT RACK TYPES

Press the confirm button (“C” - (Figure 1)) when the item 



 (CONSUMPTION) is selected, and the display

will show the counter of racks processed by the machine.

        CONSUMPT.

BASKETS NUMBER

 

0

RESET  CONS  DD-MM-YY  HH:MM
 

0       02-11-00     10:25  FAC

        CONSUMPT. RESET

BASKETS NUMBER

 

0

RESET  CONS  DD-MM-YY  HH:MM
 

0       02-11-00     10:25  FAC

itE

nbr

 

  0

  0

168

Содержание WTCS90ERB

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды