Electrolux WE170P, Руководство по обслуживанию

Страница: 71 / 85

Technical Support - DMM 71/80 599 74 98-60 Rev.00
12.4.3 Drain water circuit

Tub drain pipe
Remove the worktop.
Remove the control panel.
Remove the iron ring securing the bellow seal to the front panel.
Unfasten the screws securing the door safety interlock.
Remove the front panel.
Pull out the main drain pipe (1).
Loosen the screw of the clamp securing the tub drain pipe to the tub (2).
Pull out the pipe from the analogue pressure switch connecting the
pressure chamber.
Release the pressure chamber.
Pull out the tub drain pipe and pull out the pressure chamber (3).
Where clamps are present, you will need to open/break them. When reassembling, use clamps with the same
characteristics.
12.4.4 Pressure chamber
Remove the worktop.
Remove the control panel.
Remove the iron ring securing the bellow seal to the front panel.
Unfasten the screws securing the door safety interlock.
Remove the front panel.
Pull out the pipe from the analogue pressure switch and hooks securing it
to the welded tub.
Unfasten the screw in the clamp that fixes the drain pipe to the welded tub
and remove it from its position, pulling it out.
Push the hook (1) while at the same time lifting the chamber (2) from the
support securing it to the tub.
Turn the chamber under the tub and pull it out.
1
1
1
2
3
2
1