Electrolux Washer-extractors WS4250H, Инструкция по эксплуатации

Страница: 113 / 168

0107 44
11
Notice
Date Page
01201138
INSTRUCTION
HANDBOOK
11. Machine
operation
This screen shows that the
stored tare parameter has been
cleared.
Press SELECT.
Press SELECT.
Press once to highlight
"RESET TARE TO ZERO".
Reste tare to zero
(for machines with weighing equipment installed only)
Reset tare to zero
If your attempt to clear the tare parameter fails at this
point, you will see an error message equivalent to :
"FAILED. PRESS SELECT" on the display. For trou-
bleshooting, see the section "Fault-fi nding, weighing
equipment" in the machine manual.
SCALE ADJUSTMENTS
SELECT
RESET TARE TO ZERO
DONE !
PRESS SELECT
SELECT
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SET TARE TO A CERTAIN VALUE
READ TARE VALUE
CALIBRATE THE SCALE
ZERO CALIBRATION
READ VERSION NUMBER
EXIT
SERVICE PROGRAM
MAKE A CHOICE :
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SET TARE TO A CERTAIN VALUE
READ TARE VALUE
CALIBRATE THE SCALE
SELECT
SELECT