![Electrolux UltraSteam ESI6123 Скачать руководство пользователя страница 9](http://html.mh-extra.com/html/electrolux/ultrasteam-esi6123/ultrasteam-esi6123_manual_95827009.webp)
9
EN
CNS
Ironing chart /
织物熨烫设置表
Fabric
Temperature setting
Ironing recommendation
Acrylic
•
Dry iron on reverse side.
Acetate
•
Dry iron on reverse side while still damp or use spray to dampen.
Nylon & Polyester
•
Iron on reverse side while still damp or use spray to dampen.
Rayon
•
Iron on reverse side of fabric.
Viscose
•
Silk
••
Iron on reverse. Use an ironing cloth to prevent shine marks.
Cotton blends
••
Check label and follow manufacturer’s instructions. Use setting for the
fibber requiring lowest setting.
Wool & wool blends
••
Steam iron on reverse side or use ironing cloth.
Cotton
••
Corduroy
•••
Steam iron on reverse side or use ironing cloth.
Linen
•••
to “max”
Iron on reverse side or use ironing cloth to prevent shine marks, especially
with dark colours.
Denim
•••
to “max”
Use steam boost if needed.
Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in the table.
Tips: Always start ironing the fabrics that require low ironing temperature setting, and then increase the temperature setting for
fabrics which require higher temperature. The iron heats up faster than it cools down.
织物
温度设置
熨烫建议
腈纶
•
干熨织物背面。
醋酸纤维
•
当衣物潮湿时,熨烫织物背面,或使用喷雾熨烫织物背面。
尼龙和涤纶
•
当衣物潮湿时或用喷雾润湿时,熨烫织物背面。
人造纤维
•
熨烫织物背面。
粘胶纤维
•
丝绸
••
熨烫织物背面。请使用压熨布熨烫,以防出现闪光熨斑。
棉混纺
••
检查衣物标签并按照制造商说明处理。请从织物设置中选择最低设置。
羊毛及羊毛混纺
••
蒸汽熨烫织物背面或使用压熨布熨烫。
棉质
••
绒布
•••
蒸汽熨烫织物背面或使用压熨布熨烫。
亚麻
•••
至“最高”
熨烫织物背面或使用压熨布熨烫,以防出现闪光熨斑,在熨烫深色衣物
时更要如此。
牛仔布
•••
至“最高”
使用蒸汽喷射功能(如需要)。
不同的熨烫速度和织物湿度可能引起最优设置与上述表格内的推荐数值有所偏差。
小贴士:
请务必先熨烫具有较低温度设置要求的织物,然后再逐渐提高温度设置,熨烫具有较高温度设置要求的织物。此熨斗
的升温速度要快过冷却速度。