Electrolux SPEEDELIGHT, Оригинальное руководство пользователя

Страница: 19 / 38

19
G G..4 4..1 1 A AD DJJU US ST TM ME EN NT T O OF F T TH HE E M MIIN NIIM MA AL L D DIIS ST TA AN NC CE E
B BE ET TW WE EE EN N T TH HE E G GL LA AS SS S A AN ND D T TH HE E U UP PP PE ER R
P PL LA AT TE E ((m mo od de ellss e eq qu uiip pp pe ed d o on nllyy))
If 0 chock: H = approximately 13mm
If 1 chock: H = approximately 24mm
If 2 chocks: H = approximately 35mm
If 3 chocks: H = approximately 46mm
If 4 chocks: H = approximately 57mm
NOTE!
THE NUMBER OF CHOCKS IS GIVEN STARTING
FROM THE TOP (SEE EXAMPLE)
• 4 4 C CH HO OC CK KS S
• 2 2 C CH HO OC CK KS S
G G..5 5 W Wo orrkkp plla acce e
All the laws, regulations and directives in force in the place of
installation regarding the following must be observed.
• Correct lighting of workplaces.
• Safety in the workplace, accident prevention.
• Compulsory signs and signals.
• Hygiene.
• Work zones and separation of paths for hygienic purposes.
• Fire prevention.
• Low air pollution emissions.
G G..6 6 U Un np pa acckkiin ng g
IIM MP PO OR RT TA AN NT T
Immediately check for any damage
caused during transport. Inspect the pack-
aging before and after unloading.
• The forwarder is responsible for the goods during transport
and delivery.
• Make a complaint to the forwarder in case of visible or
hidden damage.
• Specify any damage or shortages on the dispatch note.
• The driver must sign the dispatch note: the forwarder can
reject the claim if the dispatch note is not signed (the
forwarder can provide the necessary form).
• For hidden damage or shortages becoming apparent only
after unpacking, request the forwarder for inspection of the
goods within and no later than 15 days after delivery.
• Keep all the documentation contained in the packaging.
• Remove the packaging. Take care when unpacking and
handling of the appliance to not cause any shocks on itself.
G G..6 6..1 1 F Fe ee ett iin nsstta alllla attiio on n
G G..7 7 E Elle eccttrriicca all cco on nn ne eccttiio on n
W WA AR RN NIIN NG G
Refer to “ Safety Information “.
IIM MP PO OR RT TA AN NT T
Connection to the power supply must be
carried out in compliance with the regu-
lations and provisions in force in the
country of use.
• Make sure the system power supply is arranged and able to
take the actual current load and that it is executed in a
workmanlike manner according to the regulations in force in
the country of use.
• The plug must be accessible after positioning the appliance
in the place of installation. Make sure the plug is not crushed
by the appliance. A damaged power cable can overheat and
catch fire or cause a short circuit.
• Make sure the machine power supply voltage specified on
the data plate matches the mains voltage.
• Make sure that the socket has an efficient ground contact.
1
A
B
x4
2
A
B
x4