Electrolux SPEEDELIGHT, Оригинальное руководство пользователя

Страница: 26 / 38

26
P PR RO OG GR RA AM M S SE ET TT TIIN NG G -- S Siin ng glle e P Ph ha asse e
17 FLEX
18 FLEX INSTRUCTIONS
With Flex ON the upper plate returns to the initial position at
the end of the cooking cycle (models equipped only).
NOTE!
If necessary it is possible to lower the upper
plate; press simultaneously the buttons 1 and 8
with the appliance only ready for cooking and
displaying the following screen.
1. With this option, it is possible choose when the microwave phase starts
(at the beginning or at the end of the cooking cycle).
P PR RO OG GR RA AM M S SE ET TT TIIN NG G M Mu ullttiiP Ph ha asse e
1 2
3
NOTE!
It is possible to activate the
MulPhase if the parameter is
enabled.
4 5
6 7
NOTE!
For the next steps, please
refer to point 17–18 of the
“PROGRAM SETTING
Single Phase“ table.
8
9 10 PLATE HEATING TIME
NOTE!
For the next steps, please
refer to point 5–6–7 of the
“PROGRAM SETTING
Single Phase“ table.
11 ADD PHASE
12 MICROWAVE (Mw)
OFF-ON 13
14 TIME MICROWAVE
(Mw)
NOTE!
For the next steps, please
refer to point 5–6–7 of the
“PROGRAM SETTING
Single Phase“ table.
NOTE!
In the Multiphase cycle the MW can be set only for one
phase of the cycle (ON / OFF on the display).
The MW duration time ranges from a minimum 15 seconds
to a maximum 1 minute.
The duration time of: MW + plates = 4 minutes maximum.
To eliminate the phase with the MW is necessary to set OFF
and then reset the time.
ON OFF
OFF
ON
OFF
ON
FLEX FLEX
3x
ON OFF
C
Phase_1_Heathing 1:15
Phase_2_Microw 0:45
SET
Flex On
OFF
OFF
Mw
OFF
Mw
OFF
ON OFF
Mw Mw
Mw
ON