Electrolux EWW8024E3WB, Руководство пользователя

Страница: 31 / 92

ENGLISH 31
3.
Press the two levers and pull forward the
drainage duct to let the water flow out.
4. When the container is full of water, put
the drainage duct back again and empty
the container. Do step 3 again and
again until no more water flows out from
the drain pump.
6. Remove fluff and objects from the
pump filter (if there are any).
7. Clean the filter under the water tap.
5. Pull back the drainage duct and turn
the filter counter-clockwise to
remove it.
Remove the water inlet hose from
the water tap.
Clean the filter in the inlet hose with
a stiff brush.
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged. It is therefore
a good idea to clean it from time to time.
11.8 Cleaning The Water Inlet
Filter
To clean the water inlet filters:
1. Close the water tap.
2.
3.
4. Remove the inlet hose behind the
appliance.
8. Make sure that the impeller of the
pump can turn. If this does not occur,
contact the service centre.
9. Put the filter back in the pump.
Make sure that you correctly tighten
the filter to prevent leakages.
10. Close the drain pump door.